buy 1 2738 steel hardness

DIN 1.2738 Steel AISI P20+Ni Tool Steel

DIN 1.2738 Steel AISI P20+Ni Tool Steel

Hardness as delivered 1.2738 standard vs.1.2738 HH 1.2738 standard 280 – 325 HB 1.2738 HH 320 – 360 HB.Physical properties (avarage values) at ambient temperature Modulus of elasticity [10 3 x N/mm 2] 205 Density [g/cm 3] 7.80 Thermal conductivity [W/m.K] 29.0 Specific heat capacity[J/g.K] 0.46.Coefficient of Linear Thermal Expansion 10-6 o C-1

Hardness as delivered 1.2738 standard vs.1.2738 HH 1.2738 standard 280 – 325 HB 1.2738 HH 320 – 360 HB.Physical properties (avarage values) at ambient temperature Modulus of elasticity [10 3 x N/mm 2] 205 Density [g/cm 3] 7.80 Thermal conductivity [W/m.K] 29.0 Specific heat capacity[J/g.K] 0.46.Coefficient of Linear Thermal Expansion 10-6 o C-1

Premium 1.2738

mold steel,which is now being supplied for the benefit of customers worldwide. 1.2738 1.6 3.3 15 32 Hp4Ma(d2) life of tool Machinability HP1A / HP4A(D1) / HP4MA(D2) DOOSAN PLASTIC MOLD STEEL Improved consistency in hardness before/after PWHt.Distance from the center (mm) H a r d n e s s (H v) 500 450 400 350 300 250 200 150 500 450

mold steel,which is now being supplied for the benefit of customers worldwide. 1.2738 1.6 3.3 15 32 Hp4Ma(d2) life of tool Machinability HP1A / HP4A(D1) / HP4MA(D2) DOOSAN PLASTIC MOLD STEEL  Improved consistency in hardness before/after PWHt.Distance from the center (mm) H a r d n e s s (H v) 500 450 400 350 300 250 200 150 500 450

Injection Moulding - ASSAB Global

ASSAB 618 HH is a pre-hardened plastic mould steel with good machinability and polishability.ASSAB 618 HH is DIN standard 1.2738 material.ASSAB 618 T ASSAB 618 T is a pre-hardened plastic mould steel suitable for medium and large tools that require good surface appearance.ASSAB 618 T is a modified grade of DIN standard 1.2738 material.

ASSAB 618 HH is a pre-hardened plastic mould steel with good machinability and polishability.ASSAB 618 HH is DIN standard 1.2738 material.ASSAB 618 T ASSAB 618 T is a pre-hardened plastic mould steel suitable for medium and large tools that require good surface appearance.ASSAB 618 T is a modified grade of DIN standard 1.2738 material.

Impax Supreme eng-110401/1109 - Uddeholm

Hardness 325 HB.Heat treatment Uddeholm Impax Supreme is intended for use in the hardened and tempered condition,i.e.the delivery condition.When,however,the steel is to be heat treated to a higher hardness or case hardened,the following instructions may be helpful.Soft annealing Protect the steel and heat through to 700°C (1300°F).

Hardness 325 HB.Heat treatment Uddeholm Impax Supreme is intended for use in the hardened and tempered condition,i.e.the delivery condition.When,however,the steel is to be heat treated to a higher hardness or case hardened,the following instructions may be helpful.Soft annealing Protect the steel and heat through to 700°C (1300°F).

Tool steel

The impressive result is the patented plastic mould steel THRUHARD SUPREME&(EP 1 251 187),which offers improved hardening through to the core thanks to the adapted compo-sition.This steel grade also has a higher toughness and polish- ability than 1.2311 and 1.2738.These properties make THRUHARD SUPREME&the ideal steel for practically all

The impressive result is the patented plastic mould steel THRUHARD SUPREME&(EP 1 251 187),which offers improved hardening through to the core thanks to the adapted compo-sition.This steel grade also has a higher toughness and polish- ability than 1.2311 and 1.2738.These properties make THRUHARD SUPREME&the ideal steel for practically all

1.2344 Tool Steel - Tool Steel Specification and Information

1.2344 Tool Steel.1.2344 X40CrMoV5-1 BS4659 BH13 is an air hardening hot work tool steel which combines a very good red-hardness with toughness and covers a wide variety of applications.1.2344 X40CrMoV5 hot work tool steel can be water cooled in service and offers high temperature strength and wear resistance.1.2344 is one of the hot work,chromium type tool steels.

1.2344 Tool Steel.1.2344 X40CrMoV5-1 BS4659 BH13 is an air hardening hot work tool steel which combines a very good red-hardness with toughness and covers a wide variety of applications.1.2344 X40CrMoV5 hot work tool steel can be water cooled in service and offers high temperature strength and wear resistance.1.2344 is one of the hot work,chromium type tool steels.

12345Next


Leave a Message